I had a broken printer, and with the scanning motor chassis, I made a motorized camera slider!

 In this project I am going to build a robot that draws for you.

One of the projects I wanted to build for some time was a Modular Weather Station. Modular in the sense that we can add the sensors we want just by changing the software.

Do you often forget to water your indoor plants? Or perhaps you give them too much attention and over water them?
If you do, then you should make yourself a battery-powered soil moisture monitoring stick

Warning: Replicate the project at your own risk! This project involves High Voltage

We all want our chickens to be safe at night so that’s where creativity pops up. There’s work to be done.

This instructable is about learning Morse Code with the aid of a self constructed “Morse Code Trainer”.

This project is so easy to build.

This arduino controlled LED light changes color when the humidity is not optimal.

This is a project I made for a smart lamp controled by Bluetooth with an Android App developed on Android Studio.

Electronics is a very big ocean and to explore it today I made a small lamp mini night lamp which is controlled by Arduino microcontroller.

This is the Juuke box. The Juuke box is your own musical friend, made to be as easy as possible to use.

If we have to keep away from humans (to not infect and not be infected) and animals but remain the social beings we are, what should we do?

Th͏i͏s ͏i͏s ͏a ͏s͏i͏m͏p͏l͏e ͏t͏u͏t͏o͏r͏i͏a͏l ͏o͏n ͏i͏n͏t͏e͏r͏f͏a͏c͏i͏n͏g ͏u͏l͏t͏r͏a͏s͏o͏n͏i͏c ͏s͏e͏n͏s͏o͏r ͏w͏i͏t͏h ͏n͏o͏d͏e͏m͏c͏u ͏w͏i͏f͏i ͏m͏o͏d͏u͏l͏e ͏a͏n͏d ͏m͏e͏a͏s͏u͏r͏e ͏d͏i͏s͏t͏a͏n͏c͏e. ͏

For this reason I set out to create my own energy meter to be sure of what is really happening, if we are being lied to and if we are really being deceived.

In this tutorial I’ll explain how to make a cool play set for micro/nano/mini drones using an Arduino Uno.

Combining microcontrollers, 3D printing, woodworking, and laser jet image transfer, this project will have something for everyone to learn.

The final outcome was a neat Arduino-based device that uses an ultrasonic sensor to detect the pull-ups, a buzzer that produces short beeps for each complete pull-up, and an on/off switch.

In this Instructable, let’s combine one with a USB HID Arduino microcontroller to take control of our computer with a slide of our finger.

This little Meter is a very useful device that displays important information on electrical parameters.